Installations

Installation Manual

We regularly post step-by-step installation videos on Instagram, Facebook, and YouTube to help guide you through the process. If you run into any issues or have questions along the way, don’t hesitate to reach out via email or through our social media channels. We're here to make sure you get the support you need!

A Cover MY Wheel Kit includes everything you need!

Installation Tips!

1. No Need to Remove Wheel – Install the cover without removing your steering wheel.
2. Fits Over Original Steering wheel– Designed to go over the factory leather. Don’t remove it.
3.Use One Thread – Single-thread stitching lets you adjust tension easily.
4. Tape is Optional – You can skip the double-sided tape if you stitch carefully, especially around the sides.
5. Plastic Blade Use – Use it to press edges in place and tuck in extra material.
6. Alcantara Caution – Loop thread through each pre-sewn stitch for a durable, clean look.
7. Take Your Time – Set aside 1.5–2 hours. Add some music and enjoy the process!

Installation preparation

1. Check the Steering Wheel

• If the steering wheel has worn or damaged areas, use electrical tape or other materials to repair them. This helps restore the original thickness, ensuring the cover fits snugly.

2. Clean the Steering Wheel

• Wipe the steering wheel with a damp cloth or alcohol wipes to remove any dust, grease, or residue. Make sure the surface is completely dry before proceeding.

Installation Step 1

1. Identify the front side of the steering wheel cover and slide it onto the steering wheel.

2. Align the cover so that the top (12 o'clock), bottom (6 o'clock), and sides (3 o'clock and 9 o'clock) are properly positioned.

3. If the cover has a stripe or marking, ensure it is centered at the 12 o'clock position.

Installation Step 2 & 3

1. (Optional) Use double-sided tape to secure the cover to the steering wheel.

2. Important: Avoid placing the tape on the edge of the cover. Leave a 5mm gap to allow excess material to be tucked into the spoke areas later.

3. Use the plastic blade to gently tuck excess material into the gaps around the steering wheel spokes.

4. Important: When tucking, fold the material inward to avoid scratching or damaging the surface of the cover.

Installation Step 4

1. Sew in Sections: Sew one section at a time. This ensures even stitching and better control.

2. Adjust Thread Length: Cut a piece of thread 3 to 4 times the length of the section you plan to sew.

3. Sewing Method:
• Pass the needle through the pre-sewn stitching on the cover.
• Tighten the thread after each stitch to ensure a snug fit. Avoid leaving any loose stitches as they are difficult to adjust later.

4. Handle Corners Carefully: When sewing around corners or curves, adjust the thread tension to maintain a smooth and seamless fit.

5. Finish the Threading: After completing the sewing, trim any excess thread and tuck the ends securely inside the spokes to keep the finish neat and professional.